User's Manual

System Troubleshooting
BreezeNET BU-DS.11/RB-DS.11 4-3 User’s Guide
Problem and
Indication
Possible Cause Corrective Action
Wireless link
established, but there
is no Ethernet
activity (BU-DS.11
and RB-DS.11 units).
1. Ethernet hub port or
UTP cable is faulty.
Ethernet port in unit is
faulty. The station is
associated to a BU-
DS.11 unit that is not
connected correctly to
the LAN
1. Check that the LINK LED is lighted
Green. If this is not the case, the port is
inactive. Try another port on the hub or
another UTP cable.
2. Verify that Ethernet port in unit is
working. Ping unit to verify Ethernet
connection.
3. Verify that you are using a cross-over
UTP cable (pins 1 & 3, 2 & 6) if connected
directly to workstation, or a straight-
through cable if connected to a hub.
4. Check the unit’s LINK LED indicator
and check the Ethernet counters in the
monitor to verify Ethernet activity
(see Section 3.1.6). Check that there is no
other BU-DS.11 that has the same channel
and ESSID, but is not connected to the
LAN.