User's Manual

System Troubleshooting
BreezeNET BU-DS.11/RB-DS.11 4-1 User’s Guide
4. SYSTEM TROUBLESHOOTING
The following troubleshooting guide provides answers to some of the more common
problems which may occur when installing and using the BreezeNET DS.11. If
problems not mentioned in this guide should arise, checking the Ethernet and WLAN
counters may help (see Section 3.1.7). If the problem persists, please feel free to
contact your local distributor or the BreezeCOM Technical Support Department.
4.1 Troubleshooting Guide
Table 4-1. Troubleshooting
Problem and
Indication
Possible Cause Corrective Action
No Power to Unit.
Power LED is off.
1. Power cord is not
properly connected.
2. Power supply is
defective.
1. Verify power cord is properly connected
to the BreezeNET unit and to the power
outlet.
2. If this is not the cause, replace the power
supply.