User's Manual

The DS.11 Management Utility
BreezeNET BU-DS.11/RB-DS.11 3-3 User’s Guide
•3 – Implements any changes you made and closes the window.
•4 – Closes the window without implementing any changes you made.
•5 – Implements any changes you made but leaves the window open.
3.1.1 Assigning and Editing IP Addresses Manually
1. Click the button. The Set IP dialog box is displayed.
Figure 3-2. The Set IP Dialog Box
2. Type the parameters in the appropriate fields and click OK; the MAC address is
written underneath the unit. A message box is displayed notifying you when the
changes are to take affect. This feature can be used only if the Manager is on the
same Ethernet segment as the unit and not behind the router.
Note: In order to see the unit after assigning the IP address, the PC with the Manager
should be on the same IP subnet as the assigned DS.11 IP address.
3.1.2 Selecting Units
You can select a unit to manage in one of the following ways: