User's Manual

Installation
User's Guide 2-22 BreezeNET BU-DS.11/RB-DS.11
5. Connect the 10-BASE-T connector to the network. The cable connection should
be straight.
Note: The length of the Ethernet cable connecting the Indoor unit to the user's
equipment, together with the length of the Indoor-to-Outdoor cable, should
not exceed 100 meters.
2.8.1 Verifying Correct Operation of the Indoor Unit
To verify proper operation, view the LED indicators located on the rear panel of the
outdoor unit as shown in Figure 2-8, and as described in Table 2-5.
Table 2-5. Indoor Unit LEDs
Name Description Functionality
POWER Power indication Lights Green when the Indoor unit supplies
48VDC to the Outdoor unit; OFF when no power
is supplied.
LINK Self Test and
Remote Ethernet
Link indication
OFF - Self test failed and no Ethernet link.
Green – Self test passed and remote Ethernet
link is OK.
Blinking Green – Self test passed
(instantaneously blinks when the baseband cable
is connected, regadless of the Ethernet link
status).