User's Manual

Installation
User's Guide 2-16 BreezeNET BU-DS.11/RB-DS.11
2.7.1 Connecting the Ground and Antenna Cables
The Ground terminal (marked is located on the bottom panel of the Outdoor unit,
shown in Figure 2-4. The Antenna RF connectors (marked 1 and 2 respectively)
are located on the top panel of the Outdoor unit.
1. Connect one end of the grounding cable to the Ground terminal and connect the
other end to a good ground connection.
2. Connect an RF cable between each ANT connector and the antenna. When
connecting two antennas, the Antenna Diversity feature described in Section 2.6.6
is supported.
When connecting only one antenna, use the 1 connector; make sure to seal the 2
connector using the waterproof seal provided with the unit.
Figure 2-4. Outdoor Radio Unit Bottom Panel