User's Guide

The DS.11 Management Utility
BreezeNET BU-DS.11/RB-DS.11 3-5 User’s Guide
3.1.3.1
Assigning and Editing IP Parameters Using Network Autodiscovery
Type the known Read/Write Community string in the Community field (the default string is Public
for read and Private for read/write).
Select a unit address as describe in Section 0. The unit's Read-Read/Write Community strings
appear in the SNMP Communities area of the window, and the unit's parameters appear in the IP
Parameters area of the window:
•1 Read - The read only community string of the unit.
•2 Read/Write - The read/write community string of the unit.
•3 IP Address - The IP address of the selected unit.
•4 Subnet mask -The Subnet mask of the selected unit.
•5 Default gateway - The default gateway of the selected unit.
•6 DHCP - Sets the way your system utilizes the Dynamic Host Configuration Protocol
(DHCP, used for automatic IP assignment).
•7 Always - The system searches for a DHCP server each time the PC is turned on.
•8 Smart - This is the default value. The system searches for a DHCP server only if no IP
address was assigned. If an IP address was assigned manually, the system will not
search for a DHCP server.
•9 Never - The system never searches for a DHCP server.
3.1.4 General Info Tab
The General Info tab displays general information regarding the unit's firmware and hardware
versions, and general unit address information.