User's Guide

Installation
BreezeNET BU-DS.11/RB-DS.11 2-15 User’s Guide
2.7.1 Connecting the Ground and Antenna Cables
The Ground terminal (marked is located on the bottom panel of the Outdoor unit, shown in
Figure 2-4. The Antenna RF connectors (marked 1 and 2 respectively) are located on the top
panel of the Outdoor unit.
1. Connect one end of the grounding cable to the Ground terminal and connect the other end to a
good ground connection.
2. Connect an RF cable between each ANT connector and the antenna. When connecting two
antennas, the Antenna Diversity feature described in Section 2.6.6 is supported.
When connecting only one antenna, use the 1 connector; make sure to seal the 2 connector
using the waterproof seal provided with the unit.
Figure 2-4. Outdoor Radio Unit Bottom Panel