User's Guide
Installation
User's Guide 2-14 BreezeNET BU-DS.11/RB-DS.11
•4 Metal bands (9/16” wide, minimum 12” long)
Figure 2-2 shows the locations of the holes, grooves and screw holes on the rear side of the unit.
Figure 2-3 illustrates the method of installing an unit on a pole using the supplied brackets.
Note: Make sure to install the unit with the bottom panel (the panel with the signal strength bar and
LEDs) facing downward.
Figure 2-2. Holes/Grooves/Screw Holes
Figure 2-3. Pole Mounting Installation Using the Supplied Brackets