User's Guide
Installation
User's Guide 2-2 BreezeNET BU-DS.11/RB-DS.11
2.2 Packing List
When you first open the package, verify that the unit is complete with the following components:
•1 Indoor unit
•2 Outdoor unit (includes integrated antenna or antenna connectors for optional connection to
external antennas)
•3 Pole mounting kit for the Outdoor unit (2 U-bolts that fit up to 2” poles)
•4 110/220 VAC Power Cord (may be open-ended, depending on destination country)
2.3 Other Items Required for Installation
•1 Indoor-to-Outdoor cable* (available in different lengths)
•2 Antenna(s) and RF cable(s) if using an external antenna
•3 Power mains cable termination plug per country of installation (if the supplied cable is open-
ended)
•4 Ground cable with an appropriate termination
•5 Ethernet cable (straight)
•6 3 RJ-45 connectors; one of the RJ45 connectors, designated for connection to the Indoor unit,
is equipped with a plastic cover.
•7 Appropriate means for installing the Outdoor unit. A suitable pole and/or a wall mounting kit* (if the
unit is to be installed on a wall).
•8 Installation tools and materials
•9 Crimping tool
Items marked with an asterisk (*) are available as options from BreezeCOM.
2.4 Installation Overview
Note: Outdoor units and antennas should be installed ONLY by experienced installation professionals
who are familiar with local building and safety codes and, wherever applicable, are licensed by
the appropriate government regulatory authorities. Failure to do so may void the BreezeCOM
product warranty and may expose the end user or the service provider to legal and financial
liabilities. BreezeCOM and its resellers or distributors are not liable for injury, damage or
violation of regulations associated with the installation of outdoor units or antennas.
The typical installation scheme is depicted in Figure 2-1. The installation process should follow
these general steps:
1. Select appropriate locations for the Outdoor unit, the antenna (if using an optional external
antenna) and the Indoor unit.