User Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-5 User’s Guide
3.4. System Configuration Menu
BreezeNET PRO.11 Series (SA-10)
Version : 4.3.10
Date: 15 Feb 1999 23:49:56
System Configuration menu
=========================
1 - Station Status
2 - IP and SNMP Parameters
3 - Wireless LAN Parameters
4 – Bridging
5 - Station Control
6 – Security
Select option >
Figure 3.2: System Configuration Menu
3.4.1. Station Status
Station Status is a read-only sub-menu that displays the current values of the
following parameters:
• Unit Mode – Identifies the unit’s function. For example, if the unit is an
Access Point, “AP” appears in this field. If the unit is a Station Adapter
(SA-10, SA-40) or a WB-10, "SA" appears in this field.
• Unit H/W Address – Displays the unit’s unique IEEE MAC address.
• Unit WLAN Address (SA or WB) – The address by which the unit
associates. For the SA-10, this is the address of the PC. For the SA-40
and WB-10, this is the address of the hardware. This field does not
appear when the unit is an AP.
• Station Status (SA or WB) – Current status of the station. There are
three options:
• Scanning - The station is searching for an AP with which to
associate.