User Manual

Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series 1-8 User’s Guide
orkstations that can be connected to the wireless LAN include PCs, X-
Terminals, Digital, SUN, HP, IBM, and Apple computers, and any other
device that supports Ethernet. The unit is transparent to the workgroup
devices’ hardware, software, and network operating system.
The BreezeNET Workgroup Bridge contains an embedded SNMP agent and
software downloading capabilities enabling effective management. Software
upgrades are downloaded using TFTP protocol via the Ethernet ports or via
the wireless LAN and Access Point.
1.3. Extending Range with the AMP2400S
To extend the range of the AP10-D or WB-10D, the AMP2400S-250 or
AMP2400S-500 is used. These devices amplify the RF output and receive
power to allow long range connections or connections with longer cable
runs. The diagram below shows a typical installation of the BreezeNet and
AMP2400S. (See the addendum at the end of this manual for instructions
on how to install the AMP2400S).
BREEZECOM AMPLIFIER INSTALLATION DETAILS