User Manual

Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series 1-9 User’s Guide
1.4. Antenna Selection
The AMP2440 and the BreezeNET radio modem must be professionally installed.
Table (1) shows the FCC approved configuration of the AMP2440, BreezeNET
Radio and antenna configurations.
WARNING: It is the responsibility of the installer to ensure that when used in
the United States (or where FCC rules apply), only these configurations are used.
The use of any antenna other than those listed below is expressly forbidden in
accordance to FCC rules CFR47 part 15.204.
1.4.1.1 Table (1) FCC Type Acceptance Configurations
Radio
Equipment
UNI-24
24 dBi
Grid
UNI-21
21 dBi
Grid
UNI-18
18 dBi
Grid
UNI-16
16 dBi
Panel
UNI-13
13 dBi
Panel
Omni-12
12 dBi
Omni
Omni-8
8 dBi
Omni
Omni-6
6 dBi
Omni
BreezeNET
PRO.11 with
Amp2440-250
X XXX X
BreezeNET
PRO.11 with
Amp2440-500
XX XX
*: External filter (P/N: SPF-1) is required in the United States with the 24dBi grid
antenna to comply with FCC spurious emission requirements. Install this
between the amplifier and the antenna.