User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-24 User’s Guide
4.3.1. Accessing the SA-PCR Site Survey Application
Open the SA-PCR Site Survey application as follows:
• Press the Start button, select Programs, select the BreezeCOM
Application program group and choose Site Survey.
The SA-PCR Configuration main window opens.
Figure 4.14: SA-PCR Site Survey
4.3.2. SA-PCR Site Survey Main Window
The Site Survey main window contains the following sections:
• Associated AP – This section, located at the top of the window, displays
various parameters regarding the Access Point with which the unit is
currently associated.
• Alias – The alias you have assigned to the AP that the SA-PCR is
currently associated with. To assign aliases to AP units, press the
Alias button. If no alias has been assigned to the AP, this field
displays “no alias”.
• AP Address – The IEEE MAC address of the AP.