User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-22 User’s Guide
The Radio tab contains the following parameters:
• Power Level – Level of power at which the unit is operating. There are
two possibilities, Low or High.
• Hopping Standard – The Hopping Standard is a set of rules regarding
the radio transmission standard allowed in each country. Units will work
together only if set to the same hopping standard. Use this parameter to
set the unit’s hopping standard to that of the relevant country.
4.2.11. Performance Tab
The Performance tab of the SA-PCR Configuration application allows you
to fine-tune performance and roaming parameters.
This tab is not visible when in User login mode. When in Installer login
mode, you can see the parameters. When in Technician login mode, can edit
the parameters. Only major parameters are described below.
Figure 4.13: Performance Tab
The Performance tab contains the following important parameter:
• Rts threshold (bytes) – Minimum packet size to require an RTS
(Request To Send). For packets smaller than this threshold, an RTS is