User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-19 User’s Guide
4.2.8. Power Management Tab
Note: The Power Management tab is not yet implemented.
The Power Management tab of the SA-PCR Configuration application
allows you to enable/disable power management mode, and to fine tune the
power management mode parameters.
This tab is not visible when in User login mode. When in Installer login
mode, you can see the parameters. When in Technician login mode, can edit
the parameters.
Figure 4.10: Power Management Tab
The Power Management tab contains the following parameters:
Power Management ModePowersave mode enables WLAN units
(such as laptops or hand-held devices) to conserve battery power. To
enable this feature you must also enable power saving for the AP.
When power management mode is enabled, the unit “sleeps” most of the
time, and “wakes up” occasionally to transmit to the AP. The Interval
Settings parameters affect the power management algorithm: