User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-17 User’s Guide
4.2.7. Access Rights Tab
The Access Rights tab of the SA-PCR Configuration application lets you
login to the Card as User, Installer, or Technician, and lets you change the
password.
Figure 4.9: Access Rights Tab
The Access Rights tab displays the current mode (User, Installer, or
Technician) in the Present Mode box. This mode determines the extent of
access to system parameters. Users can view some of the window tabs, but
cannot modify parameters. Installers can view all of the tabs and can modify
some of the values. Technician access rights are reserved for Certified
BreezeCOM Technicians.
When the Configuration application opens, it will begin at the same mode
that was active when it closed. If security is an issue, change the access
mode to User before you close the application. The first time the application
is opened, it is set to Installer access mode.
The default password for Installer mode is User. If security is an issue,
change the Installer password.