User Manual
SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-8 User’s Guide
Figure 4.4: Windows NT Diagnostics Window
7. Press IRQ and verify that IRQ 11 is not taken. If it is, find an IRQ
that is not taken. For example, in the illustration IRQ 2 is not taken.
8. Press Memory and verify that memory from D0000h to D3FFFh is
not taken. If it is, find another free memory location, such as
E0000h.
9. Return to the SA-PCR LAN Adapter Properties window (refer to
Figure 4.3). If the default values for Memory Address and Interrupt
are acceptable, press OK. Otherwise, enter new values and press
OK.
10. Press Close to close each installation window.
11. If configuration windows for other network components (such as
Protocol) appear, fill them in according to the instructions of your
network administrator.
12. Restart Windows NT.
13. Continue with section 4.1.4.