User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-4 User’s Guide
4.1.3.1.1 Installation for Windows 95A
⇒⇒ To install on Windows 95A, do the following:
1. Insert the SA-PCR slot in the PCMCIA slot on your computer.
Windows 95 detects the unit and displays the New Hardware
Found window.
Figure 4.2: New Hardware Found Window
2. Select the Driver from disk provided by hardware manufacturer
option and press OK.
3. When prompted for the location of the driver, insert the
BreezeCOM drivers diskette and type A:\ and press OK. The
necessary files are copied from the diskette.
4. When the Please insert disk labeled Windows 95 CD-ROM
appears, insert the Windows 95 CD and press OK. If the
Windows 95 CAB files are located on your local hard disk, you can
point to that location (usually found at
\Windows\Options\Cabs).
5. If this is the first time a network card has been installed on this
machine, a network setup window may appear. It is not necessary
to fill out this window for the purposes of this installation.
6. Restart the computer.
7. Continue with section 4.1.4.