User Manual
Device Setup and Management
BreezeNET PRO.11 Series 3-23 User’s Guide
3.7. Access Control Menu
Access Control functions enable the System Administrator or Installer to
limit access to Local Terminal Maintenance setup and configuration menus.
BreezeNET PRO.11 Series (SA-10)
Version: 4.211
Date: 25 Jun 1998 15:46:24
Access Control menu
===================
1 - Change Access Rights
2 - Change Installer Password
S - Show Current Access Right
Select option > 1
Figure 3.9: Access Control Menu
The Access Control menu includes the following options:
• Change Access Rights – This screen determines the level of access
rights to the BreezeNET PRO.11 unit’s setup and configuration menus.
When the unit is first installed, the default setting is option (1), Installer
and the default password is “user”:
• User – The Local Terminal Management menus are read-only for a
user who does not possess the correct password. The ESSID and
security parameters are hidden by asterisks (*) at this level.
• Installer – The installer has access to configure all required
parameters in the system configuration menu, as well as some of the
advanced settings. Access is password-protected. After
configuration, the installer should change access rights to option (0),
User. The installer can also change the installer password (see next
parameter).
• Technician – Only an Certified BreezeCOM Engineer possessing the
correct password can select this option to configure all the
parameters and settings.
• Change Installer Password – Type in the new password according to
the directions on screen. This screen changes the installer password to
prevent unauthorized persons from making any changes in system