User Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-20 User’s Guide
• Data Type
• Data Rate
• Antenna
• Power Level
• Number of Packets to Transmit
• Time Between Packets
• Packet Length
• Frequency Hopping menu
These sub-menus reflect the defaults already set in the unit and need
not be changed in order to carry out the survey.
5. Start the survey by selecting option (S) in the Survey Software
menu in both units. When performing a site survey from a station
to an AP (transmitting from the station to the AP), always begin
with the station (select option (S) on the station).
6. On the transmit side, a screen appears displaying a table with the
number of packets and the frequency at which each packet was
transmitted (refer to Figure 3.5). This list is updated continuously.
Select option (Q) to stop sending packets.
BreezeNET PRO.11 Series (SA-10)
Version: 4.211
Date: 25 Jun 1998 15:46:24
# Tx Packets Channel
0 37
1 10
2 7
3 30
4 28
5 44
6 35
7 12
8 48
9 76
10 42
Hit any key to return >
Figure 3.5: Transmit Statistics