User Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-14 User’s Guide
3.5.4. Maintenance
The Maintenance menu contains the following major parameters and
information:
• Display Alarm Log – The last four error messages that the unit
displayed since the last Factory Defaults reset. The Alarm log stores
events in four levels of error notifications: MSG (Message), WRN
(Warning), ERR (Error), and FTL (Fatal).
You can control message severity as follows: in the main menu, press Y-
Testing, press 2-System Info and System Parameters, and press 4-Events
Storage. Use the 1-Event Storage Policy runtime value option to set the
policy until the next reset. Use the 2-Event Storage Policy Nv ram value
option to set the constant policy for the Alarm Log.
• Japan Call Sign – The Japan Call Sign is part of the Japanese standard,
defined according to local regulations. The Japanese Ministry of
Communications supplies an activation code for the units; this code is
set in the factory for each unit.
3.6. Site Survey Menu
BreezeNET PRO.11 Series (SA-10)
Version: 4.211
Date: 25 Jun 1998 15:46:24
Site Survey menu
================
1 - System Counters
2 - Survey Software
Select option >
Figure 3.4: Site Survey Menu
The Site Survey Menu gives access to the sub-menus necessary to perform a
Site Survey that helps you position your units and align their antennas, as
well as perform troubleshooting.