User Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-3 User’s Guide
1.5 Station
Control
1.5.1 Reset Unit
1.5.2 Set Factory Defaults
2. Advanced
Settings
2.3 Performance 2.3.1 Dwell Time (AP Only) 128 msec
2.4 Radio 2.4.4 Auto Calibration Enabled
3. Site
Survey
3.1 System
Counters
3.1.1 Display Counters
3.1.2 Reset Counters
3.2 Survey
Software
3.2.1 Operation Mode
3.2.2 Data Type
3.3.3 Data Rate
3.3.4 Antenna
3.3.5 Power Level
3.3.6 Number of Packets to Tx
3.3.7 Time Between Packets
3.3.8 Packet Length
3.3.9 Display Rx Packets per Frequency
3.3.D Display Actual Configuration
3.3.L Load Default Configuration
3.3.S Start Statistics
3.3.Q Stop Statistics
3.3.N Neighboring AP’s
4. Access
Control
4.1 Change Access Rights
4.2 Change Installer Password
4.3 Show Current Access Right
* Option 1.3.5 Transmit Diversity has the default value Use #2 for the SA-
40 unit only.
** Option 1.3.7 Load Sharing has the default value Enabled for the AP-10
unit only.
3.3. Main Menu
BreezeNET PRO.11 Series (SA-10)
Version: 4.211
Date: 25 Jun 1998 15:46:24
BreezeNET Monitor
=================
1 – System Configuration
2 – Advanced Settings
3 - Site Survey
4 - Access Control
Select option >
Figure 3.1: Main Menu
PRO.11 Series
Unit Model (SA-10, SA-40, WB-10, AP-10)
Software
Version