User Manual

Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series 1-5 User’s Guide
Balancing algorithm to divide the stations equally between the available co-
located Access Points.
The BreezeNET Access Point contains an embedded SNMP agent enabling
effective management by BreezeVIEW or any standard SNMP management
station. Software upgrades can be downloaded by TFTP protocol via the
wired LAN or wireless LAN.
The Access Point is available in two models:
• AP-10 PRO.11 with two integrated omni-directional antennas.
• AP-10D PRO.11 for use with external high-gain antenna(s).
1.3.2. Single Station Adapter
The BreezeNET Single Station Adapter is a wireless LAN station adapter
that converts any device equipped with an Ethernet interface into a wireless
LAN station. The Single Station Adapter is transparent to the device’s
hardware, software, and network operating system. This enables plug-and-
play installation.
Figure 1.2: SA-10 PRO.11 with Two
Integrated Omni-Directional Antennas
The Single Station Adapter enables its workstation to communicate with
any other wireless stations in the same cell coverage area, and to access all
network resources such as file servers, wired stations, printers and shared