User Manual

Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series 1-2 User’s Guide
• Chapter 8 System Troubleshooting – Contains a troubleshooting guide
that provides answers to some of the more common problems which may
occur when installing and using BreezeNET PRO.11 Series products.
• Chapter 9 Appendix – This appendix lists MIBs and traps supported by
BreezeNET PRO.11 Series products, lists product and attachment
specifications, provides an overview of the concepts related to wireless
LANs, discusses the concepts and applications of radio signal
propagation relevant to wireless LANs, and introduces the new 802.11
standard.
1.2. BreezeNET PRO.11 Series Features
Following is a partial list of the features in the BreezeNET PRO.11 Series:
• IEEE 802.11 Compliant – All BreezeNET PRO.11 Series units are fully
compliant with the final IEEE 802.11 specification for wireless LANs,
and thus support interoperability with other 802.11 compliant vendors.
• Fully integrated product family – One high-performance Access Point
for all products in the series.
• Increased Throughput – Up to 2 Mbps data throughput; the best figure
in the market!
• Translation Bridging – Support for both translation and transparent
bridging as defined in the IEEE 802.1.h and RFC 1042 standards.
• Seamless Roaming – Network connection is maintained while roaming
between overlapping coverage areas. Transmission and reception can be
continued while moving at high speeds with no data packet loss or
duplication.
• Load Sharing – Traffic is equally distributed among all Access Points
in the area.
• Redundancy – In co-located cell environments, upon failure of an
Access Point, stations will switch to other available Access Points.
• LED Display – Power, Network Activity, and WLAN Load or Signal
Quality LEDs indicate the current status of the unit.
• Upgrading – Simple, quick, and free software upgrades via TFTP.