User Manual

The AP-10 PRO.11 is designed as a true low-profile network infrastructure
product, much like a wired hub or switch. In contrast, competitive products
take an ISA or PCMCIA adapter and insert it into a bridge chassis. This
creates a wireless backbone “kludge” that can impact network
performance and reliability.
The AP-10’s top-down design results in an access point that’s easy to install,
configure and manage, and delivers maximum throughput. With a data rate
of up to 3 Mbps and a transmission range up to 3,000 ft. in open space, or
600 ft. in an office, it can provide an aggregate backbone data rate up to 15
Mbps using a multicell configuration.
WIX
™
A proprietary algorithm, WIX manages the AP-10 PRO.11 in “multicell”
environments. WIX lets you increase aggregate backbone by overlapping up
to 15 access point coverage areas or “cells.” This capability is especially
valuable in high traffic in-building applications where multiple client
devices are transmitting and receiving in a common area. WIX manages the
multi-cell environment by balancing the load between access points,
off-loading traffic to each of these as necessary. Additionally, overlapping
coverage using multiple access points increases aggregate throughput.
SA-PCR PRO.11 PC Card
It’s nothing less than the first truly innovative
wireless PC Card. At a data rate up to 3 megabits per
second and an indoor range up to 600 ft., it’s also the best
performing IEEE 802.11-compliant card available anywhere. With its
retractable, extremely flexible, titanium wire antennas, the SA-PCR PRO.11
is the low profile PC Card mobile client
device users are waiting for. The SA-PCR
supports all popular operating systems,
including Microsoft Windows
®
95,
Windows NT
™
, Windows 3.11, Windows
CE, DOS, and Novell NetWare.
SA-10 PRO.11 Single-Port Station Adapter
Single-port, universal client adapter with built-in
diversity antenna system, connects to any RJ-45
10BASE-T Ethernet port, providing a true plug-
and-play wireless solution for PCs, Macs, Unix
workstations, hand-held data input units, printers
and most other computing and peripheral devices
without the need to install additional drivers or
configure hardware interrupts.
SA-40 PRO.11 4-Port
Station Adapter
A cost-effective, convenient 4-port wireless “mini-hub”
version of the SA-10 PRO.11 connects up to four
Ethernet clients to your wireless network.
WB-10 PRO.11 Workgroup Bridge
Connects a remote Ethernet network, wired or
wireless, to an AP-10 PRO.11 Access Point. It can
handle up to 256 hardware addresses and
includes cache RAM to handle high volume
network traffic. Diversity antenna system is built-in.
For bridges with detached antenna systems, see the
BreezeNET PRO.11 building-to-building product line.
Switching Hub
Server
AP-10
BreezeNET PRO.11
products are
designed for
enterprise
networking
including dynamic
environments with a
large number of
clients.
Overlapping coverage using multiple
access points increases aggregate throughput.