User's Manual

Appendix A. Radio Signal Propagation
User's Manual A-6 BreezeNET DS.11
2. INSTALLATION
1. Mount the antenna (see BreezeNET User's Manual) and locate the AP/SA
accordingly.
2. Make sure the antennas are in a vertical position (if not, rotate over 90
degrees).
3. Insert the power connector.
4. Attach the Unshielded Twisted Pair (UTP) cable to the Wireless Base Station.
5. Switch on the unit.
2.1 Checking The LED Indicators
Figure 2-1. DS.11 LEDs
Association/
Radio Traffic
Backbone
Traffic
Power &
Firmware
Status