User's Guide

BreezeNET Management Utility
User's Manual 4-14 BreezeNET DS.11
4.1.8 Log Tab
Figure 4-10. Log Tab
When an event occurs, a trap is sent to the defined host address. The Log tab allows
you to configure the host address to which the traps are sent.
A list of the last traps is displayed in the event log area, below the Local IP field.
The default host address is the IP address of the PC running the BreezeNET
Management utility.
1. Select the IP address as explained in Section 0. The selected address appears in
the Local IP field.
2. Click the
button to register this address as the host address.
3. Repeat Step 2 for all the IP addresses you wish to send traps to.