User's Guide

BreezeNET Management Utility
BreezeNET PRO.11 Series 4-7 User’s Guide
2. Select a unit address as describe in Section 0. The unit's Read-Read/Write
Community strings appear in the SNMP Communities area of the window, and
the unit's parameters appear in the IP Parameters area of the window:
Read - The read only community string of the unit.
Read/Write - The read/write community string of the unit.
IP Address - The IP address of the selected unit.
Subnet musk -The Subnet mask of the selected unit.
Default gateway - The default gateway of the selected unit.
DHCP - Sets the way your system utilizes the Dynamic Host Configuration
Protocol (DHCP, used for automatic IP assignment).
Always - The system searches for a DHCP server each time the PC is
turned on.
Smart - The system searches for a DHCP server only if no IP address
was assigned. If an IP address was assigned manually, the system will
not search for a DHCP server.
Never - The system never searches for a DHCP server.
3. Click
to apply configuration.