User's Guide

BreezeNET Management Utility
User's Manual 4-4 BreezeNET DS.11
Figure 4-1. BreezeNET Management Utility Main Window (IP/SNMP Tab)
4.1.1 Selecting Units
You can select a unit in one of the following ways:
Click the
button. All the current units IP addresses (under
the selected community) are displayed in the list box below. Double-click on
an address to select it.
For stations which are located behind a router, type the unit's address in the
Locate unit field and click
to display its parameters.
Signal Quality bar - This bar appears only if the selected IP address is a
WBS-DS.11 unit. The Signal Quality bar displays the signal quality between
the selected Bridge unit and the WBS-DS.11 unit connected to it.