User's Manual

BreezeNET Management Utility
BreezeNET PRO.11 Series
4-5
User’s Guide
Note:
If you select an IP address of a WBS-DS.11 unit, the signal quality is displayed
in the Signal Quality tab. This tab displays a table that lists all the MAC
addresses, connected to that AP, and their signal quality.
When the community is Read the parameters are grayed out (disabled).
4.1.2 The IP/SNMP Tab
All BreezeNET DS.11 units contain IP Host software. This software is used for
testing the unit for SNMP management functions (and for downloading software
upgrades using the TFTP protocol).
Figure 4-2. IP/SNMP Tab
The IP/SNMP tab allows you to define or edit IP parameters for the DS.11 units.