User's Manual
Table Of Contents
- 1 Introduction
- 2 The Concept
- 3 BreezeCELL Architecture
- 4 BreezeCELL Network Elements
- 5 Frequency Allocations
- 6 MIMO Support
- 7 Monitoring & Control
- 8 Installation Requirements and Procedures
- 9 Headend Equipment Installation
- 9.1 Connector Information
- 9.2 Rack Installation
- 9.3 Connecting the BreezeCELL Equipment
- 9.4 Connecting the Monitoring System
- 9.5 Connecting External Alarms
- 9.6 Connecting the Base Stations
- 9.7 UDC Configuration
- 9.8 Pilot Master/Slave Configuration
- 9.9 Measurements
- 9.10 Connecting to the Coax TV Networks
- 9.11 Measurements
- 9.12 Localized Testing Port
- 9.13 Determining BTS Output Power VS. Remote Unit Output Power
- 10 Coax Network Amplifier Installation (if applicable)
- 11 Remote Unit Installation
- 12 Preparing for Remote Unit Installation
- 13 Normal Operations
- 14 Acceptance Testing
In-building Cellular Solution for Commercial Buildings Contents
BreezeCELL
iii
Contents
1 Introduction ...................................................................................................... 1
2 The Concept ...................................................................................................... 1
3 BreezeCELL Architecture .................................................................................. 2
3.1 Typical Network .................................................................................................................... 2
3.2 Existing Cable TV Network .................................................................................................. 2
3.2.1 Frequency Limitations ....................................................................................................... 3
3.2.2 BreezeCELL Solution ......................................................................................................... 3
4 BreezeCELL Network Elements ........................................................................ 4
4.1 BreezeCELL Head End Equipment ....................................................................................... 4
4.1.1 UDC – Up Down Converter .............................................................................................. 4
4.1.2 CCD – Coax Cable Distribution ........................................................................................ 5
4.1.3 Monitoring & Control ....................................................................................................... 5
4.2 Optical Network Equipment ................................................................................................ 5
4.2.1 OCD – Optical Cable Distribution ..................................................................................... 5
4.2.2 OCN – Optical Cable Node ............................................................................................... 5
4.3 Coaxial Network Equipment ................................................................................................ 5
4.3.1 Bypass Filter - Diplexer ...................................................................................................... 6
4.3.2 Bi-directional Amplifier ..................................................................................................... 6
4.4 Remote Unit .......................................................................................................................... 6