User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationRH Menu
Chapter 4 - Operation and Administration RH Menu
129
4.10 RH Menu
The RH (Radio Head) menu includes the following options:
 General
 Ports
4.10.1 General
The RH General menu enables viewing the following read-only general radio head properties:
 Installed RH Type: RH Type is in the format rhAAAABBBBZZZWPPRbyTCO, where:
» AAAA = Lower bound of frequency band in MHz, rounded up to the nearest integer.
» BBBB = Upper bound of frequency band in MHz, rounded down.
» ZZZ = always 000 in TDD systems.
» W = always N in TDD systems.
» PP = maximum transmit power in dBm, rounded down.
» R = number of receive channels.
» T = number of transmit channels.
» C = Y if cavity filter or a gap in the band is present, N if not.
» O = Reserved (0).
 Serial Number
The RH General menu also enables viewing/updating the following parameter:
4.10.1.1 External Cavity Filter Existence
Informational parameter indicating whether an external cavity filter exists (true/false). The default is false
(external filter does not exist).
4.10.2 Ports
The RH Ports menu enables viewing the general port status parameters for all ports or for a selected
radio ports:
4.10.2.1 Calculated TX Power
The required Tx power at the radio port, in dBm. Calculated according to the Tx Power configured for
the Radio Cluster and the Topology Type. In the current release (supporting only One Sector One Carrier
topology) the RH Port Calculated Tx Power equals the Radio Cluster’s Tx Power.