User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationChassis Menu
Chapter 4 - Operation and Administration Chassis Menu
124
For each of the four ports, the following options for the Shutdown Power Port # (1-4) parameter are
available:
 shutDown: Select to shut down power to the port.
 noShutDown: Normal operation.
 rxOnly: Disable transmission on the port (enable only receive functionality).
The default status for all ports is normal operation (noShutDown).
A change in Shutdown Power Port # parameter will take effect after next reset.
In the current release the following configuration options are applicable:
1 4Rx by 2 Tx (4x2) configuration: 2 ports should be configured for Tx/Rx operation (noShutDown), and
the 2 other ports should be configured for Rx Only operation (rxOnly). Different antenna polarities
should be connected to the 2 Tx/Rx ports.
2 2Rx by 2 Tx (2x2) configuration: 2 ports should be configured for Tx/Rx operation (noShutDown), and
the 2 other ports should be disabled (shutDown). Different antenna polarities should be connected to
the 2 Tx/Rx ports.