User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationBS Menu
Chapter 4 - Operation and Administration BS Menu
118
 Select: Use the Select option to select a specific QoS Rule by its Rule Number. You can than select one
of the following:
» Use the Show option to view all parameters of the selected rule.
» Use the Update option to update one or several parameters of the selected rule. Rule is selected
by the Rule Number. Change in a QoS Rule will take effect after next reset.
» Use the Delete option to remove the selected rule from the database. The change will take effect
after next reset.
The QOS Rule parameters are:
4.7.2.6.3.3.1 Rule Number
The index number of the rule. A number in the range 1-16383. The Rule Number of an existing rule
cannot be modified.
4.7.2.6.3.3.2 Rule Status
The status of the rule (Enable or Disable).
4.7.2.6.3.3.3 Marking Rule Name
The name of the QoS Marking Rule. An optional s string of up to 32 characters.
A change in Marking Rule Name will take effect after next reset.
4.7.2.6.3.3.4 Service Flow Data Delivery Type
The Service Flow Type for data delivery services: ugs, rtvr, nrtvr, be, ertvr, or any.
A change in Service Flow Data Delivery Type will take effect after next reset.
4.7.2.6.3.3.5 Service Flow Traffic Priority
The priority of Service Flow traffic. 0-7 or ANY (255).
A change in Service Flow Traffic Priority will take effect after next reset.
4.7.2.6.3.3.6 Service Flow Media Flow Type
The Service Flow Media Flow Type, as defined in ASN-GW or AAA server. Optional parameter
(depending on value configured for Enable Service Flow Media Flow Type below), up to 32 characters.
A change in Service Flow Media Flow Type will take effect after next reset.
4.7.2.6.3.3.7 Enable Service Flow Media Flow Type
Indicates whether the condition for Service Flow Media Flow Type is enabled or disabled. If true, the
Service Flow Media Flow Type will be considered. when looking for a match.
A change in Enable Service Flow Media Flow Type will take effect after next reset.
4.7.2.6.3.3.8 Outer DSCP Marking
The DSCP value to be used for marking the outer IP header (IP/GRE). The range is 0-63.
A change in Outer DSCP Marking will take effect after next reset.