User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationBS Menu
Chapter 4 - Operation and Administration BS Menu
117
4.7.2.6.3.1 Internal ASN Traffic QOS Rules
The Internal ASN Traffic QOS Rules menu enables viewing/updating the values configured for the
following parameters:
 Intra ASN DSCP
 802.1p Priority
4.7.2.6.3.1.1 Intra ASN DSCP
DSCP priority value to be used for marking of intra-ASN (R8/R6) traffic. The range is 0-63. The default is
0.
A change in Diffserve Code Point will take effect after next reset.
4.7.2.6.3.1.2 802.1p Priority
802.1p priority value to be used for marking of intra-ASN (R8/R6) traffic. The range is 0-7. The default is
0.
A change in 802.1p Priority will take effect after next reset.
4.7.2.6.3.2 Internal Management Traffic QOS Rules
The Internal Management Traffic QOS Rules menu enables viewing/updating the values configured for
the following parameters:
 Diffserv Code Point
 802.1p Priority
4.7.2.6.3.2.1 Diffserv Code Point
DSCP priority value to be used for marking of internal management traffic. The range is 0-63. The
default is 0.
A change in Diffserve Code Point will take effect after next reset.
4.7.2.6.3.2.2 802.1p Priority
802.1p priority value to be used for marking of internal management traffic. The range is 0-7. The
default is 0.
A change in 802.1p Priority will take effect after next reset.
4.7.2.6.3.3 QOS Rules
The QOS Rules menu includes the following options:
 Show: Use the Show option to view the main parameters (Rule Status, Marking Rule Name, Service
Flow Data Delivery Type, Service Flow Traffic Priority) of each of the existing QoS Rules.
 Add: Use the Add option to add a new QoS Rule. The change will take effect after next reset.