User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationBS Menu
Chapter 4 - Operation and Administration BS Menu
113
 Required C/N Levels - 64-QAM 2/3
 Required C/N Levels -64-QAM 3/4
 Required C/N Levels - 64-QAM 5/6
 Allowed Interference Level
4.7.2.4.1 Target Ni
The target noise and interference level for the PUSC zone, in dBm.
The range is from -130 to -110 in steps of 1 (dBm). The default is -127.
4.7.2.4.2 BS Transmit Power
Available only in Show menu. The Transmit Power of transmissions from the BS. Calculated according to
the TX Power configured for the Radio Cluster and the Topology Type. In the current release (supporting
only One Sector One Carrier topology) the BS Transmit Power is the same as the Radio Cluster’s TX
Power.
4.7.2.4.3 Required C/N Levels - ACK
The C/N in dB required for sending ACK, reported to the MS for power control purposes.
The range is from -20 to 50 (dB). The default is 12.
A change in Required C/N Levels - ACK will take effect after next reset.
4.7.2.4.4 Required C/N Levels - CQI
The C/N in dB required for sending CQI, reported to the MS for power control purposes.
The range is from -20 to 50 (dB).
Must be in the range from Required C/N Levels - ACK - 8 to Required C/N Levels - ACK + 7. The default
is 12.
A change in Required C/N Levels - CQI will take effect after next reset.
4.7.2.4.5 Required C/N Levels - CDMA
The C/N in dB required for transmitting CDMA, reported to the MS for power control purposes.
The range is from -20 to 50 (dB).
Must be in the range from Required C/N Levels - CQI - 8 to Required C/N Levels - CQI + 7. The default is
9.
A change in Required C/N Levels - CDMA will take effect after next reset.
4.7.2.4.6 Required C/N Levels - QPSK 1/2
The C/N in dB required for sending QPSK 1/2, reported to the MS for power control purposes.
The range is from -20 to 50 (dB).
Must be in the range from Required C/N Levels - CDMA - 16 to Required C/N Levels - CDMA + 14. The
default is 13.