User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationGPS Installation
Chapter 2 - BreezeCOMPACT Installation GPS Installation
50
5 Insert the GPS cable through the sealing gland base (Figure 2-18)
6 Crimp both ends of the GPS data cable as described in “Connecting the GPS Cable” on page 61.
7 Connect one end to the RJ-45 connector at the bottom of the GPS (Figure 2-19).
8 Tighten the rubber bushing on the cable inside the gland base.
9 Tighten the gland nut.
10 Connect the other end of the data cable to the GPS IN connector located on the BTS panel (see
Figure 2-22).
Figure 2-18: Connecting the GPS Cable
Figure 2-19: GPS Bottom View
Rubber Bushing
Gland Nut
Sealing Gland
with RJ-45
Connector
Grounding