User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationBS Menu
Chapter 4 - Operation and Administration BS Menu
105
 ctcQamSixteenThreeOverFour (16-QAM 3/4)
 ctcQamSixtyFourOneOverTwo (64-QAM 1/2)
 ctcQamSixtyFourTwoOverThree (64-QAM 2/3)
 ctcQamSixtyFourThreeOverFour (64-QAM 3/4)
 ctcQamSixtyFourFiveOverSix 64-QAM 5/6
The default is ctcQpskOneOverTwo (QPSK 1/2).
A change in Uplink Basic Rate will take effect after next reset.
4.7.2.2.1.1.2 Maximum Sub-Burst Size
Not supported in the current release.
4.7.2.2.1.1.3 UL Permutation Base
The permutation base used in the uplink data zone.
The valid range is from 0 to 69.
A change in UL Permutation Base will take effect after next reset.
4.7.2.2.1.2 Downlink Data Zone
The Downlink Data Zone menu enables viewing/updating the values configured for the following
parameters:
 Basic Rate for Management
 Basic Rate for Data
 DL Data Permutation Base
4.7.2.2.1.2.1 Basic Rate for Management
The downlink basic rate for unicast and broadcast management traffic (non-HARQ traffic in reuse 1
region):
 ctcQpskOneOverTwoTimesSix (QPSK 1/2 Repetition 6)
 ctcQpskOneOverTwoTimesFour (QPSK 1/2 Repetition 4)
 ctcQpskOneOverTwoTimesTwo (QPSK 1/2 Repetition 2)
 ctcQpskOneOverTwo (QPSK 1/2)
 ctcQpskThreeOverFour (QPSK 3/4)
 ctcQamSixteenOneOverTwo 16-QAM 1/2
 ctcQamSixteenThreeOverFour (16-QAM 3/4)
 ctcQamSixtyFourOneOverTwo (64-QAM 1/2)
 ctcQamSixtyFourTwoOverThree (64-QAM 2/3)
 ctcQamSixtyFourThreeOverFour (64-QAM 3/4)