User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationBS Menu
Chapter 4 - Operation and Administration BS Menu
104
BS). Idle Mode should be either enabled in all units in the network (Paging Group ID other than 0) or
disabled in all units (Paging Group ID = 0). A combination in the same Radio Access Network of units
with Paging Group ID of 0 (Idle Mode disabled) and units with Paging Group ID other than 0 (Idle Mode
enabled) should be avoided.
A change in Paging Group ID will take effect after next reset.
4.7.2.2 Air Frame Structure
The Air Frame Structure menu includes the following options:
 Zones
 General
 DL Diversity Mode
 Compress Range Support
4.7.2.2.1 Zones
The Air Frame Structure - Zones menu includes the following options:
 Uplink Data Zone
 Downlink Data Zone
 First Zone
 Uplink Feedback Zone
 Frame Structure Mode
4.7.2.2.1.1 Uplink Data Zone
The Uplink Data Zone menu enables viewing/updating the values configured for the following
parameters:
 Uplink Basic Rate
 Maximum Sub-Burst Size
 UL Permutation Base
4.7.2.2.1.1.1 Uplink Basic Rate
The uplink basic rate:
 ctcQpskOneOverTwoTimesSix (QPSK 1/2 Repetition 6)
 ctcQpskOneOverTwoTimesFour (QPSK 1/2 Repetition 4)
 ctcQpskOneOverTwoTimesTwo (QPSK 1/2 Repetition 2)
 ctcQpskOneOverTwo (QPSK 1/2)
 ctcQpskThreeOverFour (QPSK 3/4)
 ctcQamSixteenOneOverTwo 16-QAM 1/2