User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 4 - Operation and AdministrationBS Menu
Chapter 4 - Operation and Administration BS Menu
102
BS). Idle Mode should be either enabled in all units in the network (Paging Group ID other than 0) or
disabled in all units (Paging Group ID = 0). A combination in the same Radio Access Network of units
with Paging Group ID of 0 (Idle Mode disabled) and units with Paging Group ID other than 0 (Idle Mode
enabled) should be avoided.
4.7.2 Select
Select the BS to view or update its parameters or to delete it. BS is selected by its BS Number.
The selected BS menu includes the following options:
 General
 Air Frame Structure
 Mobility
 Power Control
 Feedback
 Connectivity
 Connectivity
 Management Thresholds
 Keep Alive
 Scheduler
4.7.2.1 General
The selected BS General parameters menu includes the following options:
 Show: Select to view the current values of the BS General parameters.
 Update: Select to update the configured values of the BS General parameters.
 Delete: Select to delete the BS (the BS ID LSB of an existing BS cannot be modified. To change it you
must delete the BS and re-define it).
The BS General parameters are:
 BS ID LSB
 Operator ID
 Name
 Calculated Center Frequency
 Calculated Bandwidth
 Paging Group ID