User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationGPS Installation
Chapter 2 - BreezeCOMPACT Installation GPS Installation
47
Use the metal bands to attach and fasten the GPS to a pole of up to 4” (See Figure 2-14). For
wall-mounting, thread 4mm screws (not supplied) through the designated holes and tighten firmly.
1 Thread the upper two rods through the carriage and also through the GPS bracket.
2 Attach nuts, washers and spring washers to both sides of the threaded rods and fasten to fix the rods
in place on the carriage (Figure 2-15).
To install the GPS on a pole:
Figure 2-14: Pole Mounting the GPS Using Metal Bands (4” Pole)
To install the GPS on the carriage:
Sealing Gland
GPS Receiver
GPS Antenna
Bracket
Metal band