User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationConnecting the BreezeCOMPACT Cables
Chapter 2 - BreezeCOMPACT Installation Connecting the BreezeCOMPACT Cables
63
Refer to Figure 2-30.
1 Remove the sealing gland from the unit.
2 Release the sealing gland nut from the gland base and remove the plug.
3 Remove the rubber bushing from the sealing gland.
4 Thread the cable through the released nut and the rubber bushing.
5 Crimp the cable and assemble the appropriate connector.
6 Connect the cable to the connector on the outdoor unit.
7 Insert the rubber bushing into the gland base.
8 Return the gland base to the outdoor unit and tighten firmly.
9 Return the gland nut to the gland base and firmly tighten to ensure proper sealing.
Figure 2-29: Small (7.9) Sealing Gland Components
To connect a cable to a connector with a large gland (10.5):
Figure 2-30: Large (10.5) Sealing Gland Components
Sealing Gland Base with
connector underneath
Sealing Gland Nut
Plug
Sealing Gland Plug
Rubber Bushing
Sealing Gland Base
Sealing Gland Nut