User's Manual Part 2

BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationConnecting the BreezeCOMPACT Cables
Chapter 2 - BreezeCOMPACT Installation Connecting the BreezeCOMPACT Cables
54
Table 2-2: BTS Connectors
Connection Connector Type Functionality Cable
PWR 6-pin mini-fit Molex Power connection, DC in -40 to -60
VDC at connector input.
Maximum consumption: 105W, AVG
125W peak without PoE
Shielded 16AWG
DAT1 Cage for Small Form Factor
Pluggable (SFP) Optical
Transceivers Gigabit Ethernet
For data and Inband management OM3 50um multimode
optical cable
Length:
≤100m
DAT2 RJ-45 female For data and Inband management Shielded CAT-5e
Length:
≤100m
DAT3 RJ-45 female For Out Of Band management or
Data + Inband management:
 PoE Data + DC Out
 PoE Data + DC In (depending on
configuration, for future use)
 PoE in
≤ 70W (allowed only for 2x2,
for future use)
 PoE out for camera connection
≤ 20W, up to 1.2A
 OOB management
or
Data +IB management
or
Future Ethernet chain
Shielded CAT-5e
Length:
≤100m
CAUTION
The current limit of 1.5A
on the power pins of
DAT3 is relevant only in
case the input voltage to
the BTS is normal polarity.
(GND) Two grounding screws Connection to ground (earth) 10AWG + a cable to
connect between the two
GND connections
GPS IN RJ-45 female Connection to GPS to the master BTS
via RS-422 signals,
or
Chaining GPS signals connection from
master BTS from previous GPS out
connector (future option).
Shielded CAT-5e
Length:
≤20m
SYNC OUT RJ-45 female Chaining GPS signals connection from
master BTS from previous GPS out
connector (future option).
Shielded CAT-5e
Length:
≤20m