User's Manual Part 1
Table Of Contents
- BreezeCOMPACT System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- 1.1 About WiMAX
- 1.2 The BreezeCOMPACT Solution
- 1.3 Element Management Systems
- 1.4 Specifications
- 1.4.1 Modem & Radio
- 1.4.2 Sensitivity (per channel)*
- 1.4.3 Data Communication (Ethernet Interfaces)
- 1.4.4 Configuration and Management
- 1.4.5 Standards Compliance, General
- 1.4.6 Environmental
- 1.4.7 Mechanical and Electrical
- 1.4.8 Antennas
- 1.4.8.1 Attached, 3.3-3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.2 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx), with EDT
- 1.4.8.3 3.3 -3.8 GHz, 2 Ports 65º Dual Slant (x)
- 1.4.8.4 3.3 -3.8 GHz, 2 Ports 90º Dual Slant (x)
- 1.4.8.5 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.6 3.3 -3.8 GHz, 4 Ports 90º Double Dual Slant (xx)
- 1.4.8.7 3.3 -3.8 GHz, 90º Vertical
- 1.4.9 BMAX-4M-GPS Receiver Specifications
- Chapter 2 - BreezeCOMPACT Installation
BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationPole Mounting with an Attached Antenna
Chapter 2 - BreezeCOMPACT Installation Pole Mounting with an Attached Antenna
42
1 Mount the BTS on the carriage as described in step 1-2 above.
2 Thread two metal bands through the grooves on the carriage.
1 Attach the antenna tilting arms to the carriage using screws, washers and spring washers. Do not
over tighten.
2 Assemble the antenna and fasten the two lower screws to the carriage and the upper two to the
brackets.
To prepare for mounting on a pole up to 6'' (using metal bands):
To mount the antenna:
Figure 2-10: Assembling the Antenna on the Carriage
Antenna Tilting
Arms (x2)
Antenna Alignment
Screw (x2)
Attached Antenna
Antenna Fastening
Screws (x4)