User's Manual Part 1
Table Of Contents
- BreezeCOMPACT System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- 1.1 About WiMAX
- 1.2 The BreezeCOMPACT Solution
- 1.3 Element Management Systems
- 1.4 Specifications
- 1.4.1 Modem & Radio
- 1.4.2 Sensitivity (per channel)*
- 1.4.3 Data Communication (Ethernet Interfaces)
- 1.4.4 Configuration and Management
- 1.4.5 Standards Compliance, General
- 1.4.6 Environmental
- 1.4.7 Mechanical and Electrical
- 1.4.8 Antennas
- 1.4.8.1 Attached, 3.3-3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.2 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx), with EDT
- 1.4.8.3 3.3 -3.8 GHz, 2 Ports 65º Dual Slant (x)
- 1.4.8.4 3.3 -3.8 GHz, 2 Ports 90º Dual Slant (x)
- 1.4.8.5 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.6 3.3 -3.8 GHz, 4 Ports 90º Double Dual Slant (xx)
- 1.4.8.7 3.3 -3.8 GHz, 90º Vertical
- 1.4.9 BMAX-4M-GPS Receiver Specifications
- Chapter 2 - BreezeCOMPACT Installation
BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationPole Mounting with an Attached Antenna
Chapter 2 - BreezeCOMPACT Installation Pole Mounting with an Attached Antenna
39
2.5.2 Mounting the BTS and Antenna on the Carriage
1 Attach the M8x20 nuts, washers and spring washers to the BTS and slightly fasten.
Figure 2-6: The Carriage, Part of the Antenna Mounting Kit
CAUTION
The weight of BTS is 9 Kg and the weight of the Pole Mounting Kit is approximately 5 kg. Plan the
installation accordingly. It is recommended to use a harness to lift the units.
Install the unit using the supplied kit only.
To prepare for mounting on a 1”-4” pole:
Holes for pole
mounting rods (x4)
Grooves for
metal bands
Holes for fastening
screws (x6)
Holes for external
antenna kit screws (x2)
Holes for external
antenna kit
screws (x4)