User's Manual Part 1
Table Of Contents
- BreezeCOMPACT System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- 1.1 About WiMAX
- 1.2 The BreezeCOMPACT Solution
- 1.3 Element Management Systems
- 1.4 Specifications
- 1.4.1 Modem & Radio
- 1.4.2 Sensitivity (per channel)*
- 1.4.3 Data Communication (Ethernet Interfaces)
- 1.4.4 Configuration and Management
- 1.4.5 Standards Compliance, General
- 1.4.6 Environmental
- 1.4.7 Mechanical and Electrical
- 1.4.8 Antennas
- 1.4.8.1 Attached, 3.3-3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.2 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx), with EDT
- 1.4.8.3 3.3 -3.8 GHz, 2 Ports 65º Dual Slant (x)
- 1.4.8.4 3.3 -3.8 GHz, 2 Ports 90º Dual Slant (x)
- 1.4.8.5 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.6 3.3 -3.8 GHz, 4 Ports 90º Double Dual Slant (xx)
- 1.4.8.7 3.3 -3.8 GHz, 90º Vertical
- 1.4.9 BMAX-4M-GPS Receiver Specifications
- Chapter 2 - BreezeCOMPACT Installation
BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationPole Mounting with an Attached Antenna
Chapter 2 - BreezeCOMPACT Installation Pole Mounting with an Attached Antenna
38
2.5 Pole Mounting with an Attached Antenna
When using the attached antenna, you first mount the BTS on the carriage, then also the antenna (and
optionally GPS), and finally lift the assembly up the pole, attach the clamps/metal bands and fasten the
screws.
2.5.1 Package Content
Antenna
Antenna mounting kit, including:
» One carriage
» 2 x Antenna tilting arms
» 6 x M8 Hex nuts
» 6 x M8x22 screws
» 6 x M8 flat washers
» 6 x M8 spring washers
Pole mount kit - use the following parts:
» Clamps/metal bands depending on pole diameter
» 4 rods
» 8 x nuts, washers, and spring washers