User's Manual Part 1
Table Of Contents
- BreezeCOMPACT System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- 1.1 About WiMAX
- 1.2 The BreezeCOMPACT Solution
- 1.3 Element Management Systems
- 1.4 Specifications
- 1.4.1 Modem & Radio
- 1.4.2 Sensitivity (per channel)*
- 1.4.3 Data Communication (Ethernet Interfaces)
- 1.4.4 Configuration and Management
- 1.4.5 Standards Compliance, General
- 1.4.6 Environmental
- 1.4.7 Mechanical and Electrical
- 1.4.8 Antennas
- 1.4.8.1 Attached, 3.3-3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.2 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx), with EDT
- 1.4.8.3 3.3 -3.8 GHz, 2 Ports 65º Dual Slant (x)
- 1.4.8.4 3.3 -3.8 GHz, 2 Ports 90º Dual Slant (x)
- 1.4.8.5 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.6 3.3 -3.8 GHz, 4 Ports 90º Double Dual Slant (xx)
- 1.4.8.7 3.3 -3.8 GHz, 90º Vertical
- 1.4.9 BMAX-4M-GPS Receiver Specifications
- Chapter 2 - BreezeCOMPACT Installation
BreezeCOMPACT System Manual
Chapter 2 - BreezeCOMPACT InstallationBreezeCOMPACT Installation
Chapter 2 - BreezeCOMPACT Installation BreezeCOMPACT Installation
33
2.3 BreezeCOMPACT Installation
2.3.1 Installing the BTS on a Pole
The BTS can be installed on poles of various sizes using the supplied mounting kits.
For poles of 1''-4'' in diameter, use the supplied metal clamps.
For larger poles (up to 6”) use the metal bands and two clamps out of the four included in the pole
mount kit.
When an attached antenna is to be installed together with the BTS, use the carriage mounting kit, which
includes a carriage and parts to attach the antenna. Install the BTS and the antenna on the ground and
then lift the assembly up the pole using the carrying hook.
INFORMATION
Install the unit with the bottom panel, including the LEDs, facing downward. Note the direction arrows
(UP) on the sides of the BTS.
CAUTION
The weight of the BTS is 9 kg and the weight of the Pole Mounting Kit is approximately 5 kg. Make sure
to plan the installation accordingly. It is recommended to use a harness and carrying hook to lift the
units.
Install the unit using the supplied kit only.
CAUTION
Do not use the hook for lifting the assembly when the GPS is installed on the carriage. This may damage
the GPS. Tie the carriage on both sides and carefully lift it up the pole.