User's Manual Part 1
Table Of Contents
- BreezeCOMPACT System Manual
- About This Manual
- Contents
- Figures
- Tables
- Chapter 1 - System Description
- 1.1 About WiMAX
- 1.2 The BreezeCOMPACT Solution
- 1.3 Element Management Systems
- 1.4 Specifications
- 1.4.1 Modem & Radio
- 1.4.2 Sensitivity (per channel)*
- 1.4.3 Data Communication (Ethernet Interfaces)
- 1.4.4 Configuration and Management
- 1.4.5 Standards Compliance, General
- 1.4.6 Environmental
- 1.4.7 Mechanical and Electrical
- 1.4.8 Antennas
- 1.4.8.1 Attached, 3.3-3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.2 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx), with EDT
- 1.4.8.3 3.3 -3.8 GHz, 2 Ports 65º Dual Slant (x)
- 1.4.8.4 3.3 -3.8 GHz, 2 Ports 90º Dual Slant (x)
- 1.4.8.5 3.3 -3.8 GHz, 4 Ports 65º Double Dual Slant (xx)
- 1.4.8.6 3.3 -3.8 GHz, 4 Ports 90º Double Dual Slant (xx)
- 1.4.8.7 3.3 -3.8 GHz, 90º Vertical
- 1.4.9 BMAX-4M-GPS Receiver Specifications
- Chapter 2 - BreezeCOMPACT Installation
Chapter 2 - BreezeCOMPACT Installation Unpacking and Inspecting
31
BreezeCOMPACT System Manual
Table 2-1: Mounting Options
Configuration Option Use these items/kits Refer to Example
Standalone (without an
attached antenna)
Pole mount - poles
between 1” - 4”
Pole mount kit (four clamps),
supplied with the unit.
Sun-guard cover
“To mount the BTS on a pole of up to 4”
(using clamps):” on page 34
Pole mount - poles up
to 6”
Metal bands
Pole mount kit (two clamps only)
Sun-guard cover
“To mount the BTS on a pole of up to
6”(using metal bands):” on page 36
With an attached
antenna
Pole mount - poles
between 1” - 4”
Antenna
Pole mount kit
Antenna mounting kit (includes
carriage and parts to attach the
antenna)
“Pole Mounting with an Attached
Antenna” on page 38
“To prepare for mounting on a 1”-4”
pole:” on page 39
“To mount the antenna:” on page 42