User's Manual

4Motion Installation Manual
30
Chapter 2 - BreezeCOMPACT Installation Unpacking and Inspecting
2.2.1 Package Content
 BTS (weight: 9 kg)
 Mounting kit (for 1''-4'' poles) including:
» 4 x heavy duty metal clamps
» 4 x M8 threaded rods
» 4 x M8x22 Hex screws
» 8 x M8 nuts
» 8 x M8 flat washers
» 8 x M8 spring washers
 Sealing gland wrench
 For poles up to 6'' - an additional kit containing 4 metal bands (ordered separately)
 For poles larger than 6” and for wall mount - two large heavy duty metal clamps (ordered separately)
2.2.2 Additional Installation Requirements
The following items are also required to install the BTS:
 Power Supply: High power AC/DC Power Supply unit and DC power cable* (available in various
lengths)
 Power cable*: a 250m power cable drum. 6-pin mini-fit (manufactured by Samtek), DC in -40 to
-60VDC at connector input.
 Ethernet cable*: a 250m CAT5e cable drum (connectors not included)
 Optical fiber cable*: 10/100/1000BASE-T Optic SFP (small form-factor pluggable) shielded
 Antenna(s)* and RF cable(s)* for connecting the antenna(s) to the BTS. (applicable for units without
integral antennas). External antennas are connected via LMR-400 1m / 0.5m cables.
 Grounding 10 AWG cable with an appropriate termination
 GPS Antenna kit including mounting kit, 3m cable, and one lightning arrestor
 Hook for carrying the assembly up the pole
 Installation tools and materials
INFORMATION
Items marked with an asterisk (*) are available from Alvarion.