User's Manual
Table Of Contents
- BreezeNET B130/B300 GigE Technical User Manual
- Chapter 1 - Getting Started
- Chapter 2 - Hardware Description
- 2.1 Power supply units (IDU)
- 2.2 Outdoor Units (ODU)
- 2.3 Installation Preparations
- 2.3.1 Required Components and Accessories
- 2.3.2 Antenna Placement
- 2.3.3 Antenna Poles Usage
- 2.3.4 Poles with Stretching
- 2.3.5 Wall Mounted Pole
- 2.3.6 Antenna Poles Requirements
- 2.3.7 Grounding when Using IDU-BS-G
- 2.3.8 Antenna Alignment
- 2.3.9 Precaution Measures
- 2.3.10 Service Cable Soldering Procedure
- 2.3.11 Tools Required at the Installation Site
- 2.4 BU/RB-B130D/B300D-5X-GigE
- 2.5 BU/RB-B130/B300-5X-GigE
- 2.6 Mounting Kit (MOUNT-KIT-85)
- 2.7 Specifications
- Chapter 3 - Basic Configuration Instructions
- Chapter 4 - Link Configuration
- Chapter 5 - Configuration Via Web Interface
- Chapter 6 - Supplementary Information
Chapter 5 - Configuration Via Web Interface Maintenance
Alvarion BreezeNET B130/B300 GigE 88 Technical User Manual
5.5 Maintenance
"Firmware" section shows current firmware version, firmware build date, serial
number and system up time.
"Upload"/"Download" sections allow uploading and downloading license files,
firmware and configuration on/off the device.
The following buttons can be used:
"Reboot" button - reboots the device.
"Restore Factory Settings" button - restores factory default configuration.
"View Current License" button - shows current device license parameters in a
separate window
"View Current Configuration" button - shows the full running device
configuration in text format in a separate window
"Create Diagnostic Card" button - creates a text file that contains complete
information set from the device such as: full device configuration listing, system
log output, license information, "mint map detail" command output, interfaces
statistics and so on.
Figure 5-17: Maintenance